13
OPERATING YOUR CARRIER – RAISING AND LOWERING THE PLATFORM AND FOLDING INTO
THE IN-USE LOCKED POSITION
WARNING!:
When operating your carrier be sure to stay clear of moving parts and pinching points to avoid personal injury. DO
NOT attempt to fold the carrier into the in-use or storage position if you cannot lift 50 pounds.
WARNING!:
Platform must be all the way down to load mobility devices. Make sure to stay away from uneven surfaces curbs,
steps, etc. that may cause the platform to tip or be off balance.
1.)
While supporting the platform in the storage or up position with one arm, remove the loop grip clevis pin and
fold the platform down like a tailgate.
2.)
Place the loop grip clevis pin back in to lock the platform in place.
3.)
Lower the carrier with the toggle switch on the Powerhead.
4.)
Load your cargo and secure it to the platform
5.)
Raise the Carrier upward until the Powerhead reaches the end of its travel. You will hear a built in torque limiter
click when you have reached the end of travel distance. PROLONGED OPERATION OF THE TORQUE LIMITER IS
NOT RECOMMENDED.
