7
7.1 NETWORK SETUP (continued)
Assign IP Address
：
If the Eyezone B1080P-1 is connected to a network without a DHCP
server or you want to use Local FTP Server function, type the fixed IP address, Mask,
Gateway and DNS for the Eyezone B1080P-1.
PS. Refer to 5.1 for how to enter IP address by remote control.
NOTE
：
Before setting the IP address, Mask, Gateway and DNS, check the network information
of your PC. Please follow the steps below to get the network information of your PC.
Step 1
：
Click on “Start“
→
“Run“ and type in ”command“, then press “ENTER”.
The MS-DOS window will appear, type in ” ipconfig “ and then press “ ENTER “
to get the network information.
Step 2
：
Assign IP Address, Mask (Subnet Mask) and Gateway (Default Gateway)
for the Eyezone B1080P-1.
Enter the same values of the Subnet Mask and Gateway, and be careful not to enter
the values of IP address that are already used by other devices on the network.
Media Player 11 Server
：
Enable/ disable the Media Player 11 server.
8
7.2 FTP
SETUP
Local FTP Server
：
Turn on/ off the Eyezone B1080P-1 server.
( If you use the Eyexone B1080P-1 server, please disable the DHCP function and input a
fixed IP address, Mask, Gateway and DNS of the Eyezone B1080P-1.
)
Local FTP Server Setup
：
To set the “Port”, “User ID” and “Password” of the Eyezone
B1080P-1.
(The Default Port
：
21, User ID
：
root, Password
：
admin)
FTP Auto Download
：
Enable/ Disable the FTP auto download function.
Remote FTP Download Setup
- Server IP
：
Type in the domain name of the FTP site or IP address as was given to you by
your
Web hosting provider.
- Port
：
The default port for FTP is 21. In most cases you should not change this number.
If the FTP site uses a port other than 21, you should enter the correct port.
- User ID
：
Type the user name of the Remote FTP server.
- Password
：
Type the Password of the Remote FTP server.
- FTP Path
：
Enter the folder path that you want to share.
Network Timer NTP
：
Set the NTP Server and Auto Download Time here.
1. It is recommended to use 204.152.184.72 as the IP address for the NTP server.
2. Time Zone must be set properly for the auto-download function.
Local HTTP Server
：
Enable/ Disable the HTTP command function.
Local HTTP Server Setup
：
To set the “Port”, “User ID” and “Password” of the Eyezone
B1080P-1. (The Default Port
：
80, User ID
：
root, Password
：
admin)
NOTE
：
Press the “SETUP” button on the remote control to save the settings, and it
will auto exit the settings screen, then restart the Eyezone B1080P-1.
