extronics iWAP XN3, Инструкция по установке и эксплуатации

Страница: 18 / 28

XN3 Installation and Operating Manual
18
3.9.4 Console Port
There are two types of console port connectors that can be specified as below.
Only one type is possible on the same unit.
3.9.4.1 RJ45
The console port is a standard Cisco RS232 configuration port on an RJ45 socket.
The port for Cisco Access Points is 9600 baud, 8 data bits, no parity, 1 stop bit.
Other vendors may use different formats.
3.9.4.2 Mini USB
3.10 Intrinsically Safe RF Outputs
Refer to Figure 8 for location of Intrinsically Safe RF outputs.
3.10.1 Example of RF threshold power calculation
The following example shows how the RF threshold power may be calculated:
Maximum transmitter output power (from transmitter datasheet) = 20dBm
(100mW)
Coaxial cable loss = 2dB
Antenna gain = 5dBi
Threshold power = 20dBm – 2dB + 5dBi
Threshold power = 23dBm (200mW)
Pin Function
1 RTS
2 DTR
3 TXD
4 GND
5 GND
6 RXD
7 DSR
8 CTS
Pin Function
1 Vcc
2 D-
3 D+
4 ID
5 GND
Table 4: Cisco console port wiring