XTP T HWP 101 4K Wallplate Transmitter • Installation
6
Mud Ring Installation
Mounting Screw
Backing Clip
Rotate the Backing Clip
out of the way to insert
the mud ring into the wall.
Figure 2.
Installing the Mud Ring with Backing Clips
1.
Place 1.25 inch (3.18 cm) or 0.75 inch (1.90 cm) #6-32 thread machine screws through
the large holes in the two corners of the mounting bracket. Use the shortest screw
possible.
2.
Loosely fasten the mounting backing clip on the end of each screw.
3.
Insert the mounting bracket into the opening in the wall (see
on the previous page).
4.
Rotate each backing clip so that the tab is behind the installation surface to hold the
bracket snugly in place when the screw is tightened.
NOTE:
The backing clip can be installed as shown in Layout A or Layout B (see
figure 3).
Layout A
0.75" #6-32 Screw
Backing Clip
Backing Clip
Mounting Surface
Mounting Surface
Layout B
1.25" #6-32 Screw
Figure 3.
Backing Clip Installation
5.
Use a cross-head (Phillips) screwdriver to fasten the screws and backing clips in place.
Содержание XTP T HWP 101 4K
Страница 6: ......
Страница 8: ...XTP T HWP 101 4K Wallplate Transmitter Contents viii ...
