VNR 100 • Reference Information
29
Preparation for Using the gcode Frame Translator Utility
The gcode utility is run in a command window on the recorder where the required recording
is stored.
A command window may be opened from a remote Windows PC using WinSCP.
Using WinSCP and PuTTY
1.
Open WinSCP and enter the IP address of the VN-Recorder. Use the following
parameters to log in.
•
Port number
=
22
•
File protocol
=
SFTP
•
User name
=
matrix_rec
•
Password
=
matrix
WinSCP Login
?
X
Session
Stored sessions
Environment
Directories
SSH
Session
Port number:
Host name:
User name:
Private key file:
Password:
10.100.247.87
matrix_rec
22
Protocol
File protocol:
SFTP
Allow SCP fallback
Advanced opons
Select color
Close
Save...
Login
Figure 25.
WinSCP Login
2.
Select
Login
. The directory structure of the VN Recorder is displayed:
1
1
2
2
Figure 26.
VN Recorder Directory Structure
By default, recordings are held in the
Recording_Files
directory (see figure 26,
1
)
and the gcode Utility is located in the
VNRecorder_verx.y.z
directory (
2
). Usually,
only one VNRecorder directory will be present; if the recorder has been upgraded, use
the current version directory.