Extron electronics VNR 100 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 44

Extron electronics VNR 100 Скачать руководство пользователя страница 21

VNR 100 • Replacing the VNR 100 Drives

15

Replacing the
VNR 100 Drives

There are two optional drive replacement kits for the Extron VNR 100:

•

OS Drive Replacement Kit

•

Media Drive Replacement Kit

The drives allow the recorder to be moved between secure areas without compromising
confidential data. The media drive kit also offers a convenient way to archive materials.
There are four drive bays on the front panel of the VNR 100. From left to right, they are
numbered 0 - 3. The OS drive is number 0 and the media drive is number 1.

Media Drive (drive #1)

OS Drive (drive #0)

A

B

C

Figure 15.

Media Drive and OS Drive

OS Drive Replacement Kit

Replacing the OS Drive

ATTENTION:

Do not remove the OS or Media drive when the VNR 100 is powered on.

ATTENTION:

Ne retirez pas le driver OS ou multimédia lorsque le VNR 100 est

branché.

NOTES:

•

The replacement drive does not have a default IP address assigned. This must be
set by the user.

•

The OS drive is licensed to run only on the VNR 100 for which it was supplied and
cannot be used with any other VNR 100 unit.

•

A label fixed to the top of the drive shows the serial number of the VNR 100 for
which it is intended to be used.

«
...
19
20
21
22
23
...
»

Содержание VNR 100













































Отзывы:

Нет отзывов