Extron electronics TouchLink TLP Pro 725C NC, Руководство пользователя

Страница: 29 / 42

On-screen Menus
On-screen menus allow initial configuration of the touchpanels.
Setup Menu
To open the setup menu, use a screw driver with a fine blade to press the
Menu
button. The
Menu button is located on the base of the TLP Pro 725C (see figure 13 ,
A
on page 17).
The menus open at the
Status
screen. There are five different screens:
•
Status (see below)
•
Audio (see page 23)
•
Network (see following page)
•
Advanced (see page 24)
•
Display (see page 22)
These can be selected by pressing the appropriate button in the navigation panel at the top of
the screen. The button for the selected screen is yellow. The buttons for the remaining screens
are black.
There is also a red
Exit
button in the top right corner of the screen. Pressing this button applies
and saves any changes and closes the menu screens.
Status
Press the
Status
button in the navigation panel at the top of any screen to open the
Status
screen.
Status
Display Audio Advanced Exit
Network
Info
Model: TLP Pro 725C
Part Number: 60-1564-02
Firmware
Version: 1.02.0001-b001
Network
IP Address:
DHCP:
Host Name:
Off
192.168.254.251
TLP-AB-CD-EF
Display
Resolution:
GUI Project:
Sleep Timer: 1024x600
N/A
5 Minutes
Audio
Master Volume:
Master Mute:
Off
99
Advanced
Controller IP: N/A
Project Size: N/A
Bootloader
Version: 1.03.0000
Figure 15.
Status Screen
The Status screen is a read-only screen that provides basic information about the touchpanel.
Each of the other four panels shows a summary of the information on the other screens.
Pressing any of the panels opens the corresponding screen in exactly the same way as pressing
the buttons in the top navigation panel.
A green bubble in the
Network panel lights when there is a network connection or a red square
appears if there is no connection. The green bubble in the
Advanced
panel lights when a control
processor is connected or a red square appears if none is connected.
TLP Pro 725C Series Touchpanels • On-screen Menus 19