Extron electronics TouchLink TLP Pro 725C NC, Руководство пользователя

Страница: 26 / 42

Panel Features
This section describes the TLP Pro touchpanels:
•
TLP Pro 725C Front Panel and Enclosure Features
•
TLP Pro 725C Base Features
TLP Pro 725C Front Panel and Enclosure Features
Figure 12 shows the TLP Pro 725C front panel and the Cable Cubby enclosure.
A A
B B
C C
D D
B B
F F
E E
Figure 12. TLP Pro 725C Front Panel
A
LCD screen — The TLP Pro 725C series has a 7-inch screen with a 1024x600 resolution.
B
Motion sensor (2) — Detects motion between three to five feet from the touchpanel, and at
least 15° from the center axis.
•
When no motion is detected for a user-defined period of time, the touchpanel enters
sleep mode.
•
When motion is detected by the sensor, the screen display is restored and active.
C Communication LED — Shows the configuration and connection status of the touchpanel:
•
Unlit during normal operation (the touchpanel is configured and connected to an IP Link
Pro control processor).
•
Blinks red if the touchpanel has been configured but is not connected to an IP Link Pro
control processor.
•
Lit solidly if the touchpanel is not configured and is not connected to an IP Link Pro
control processor.
The indicator can be toggled between enabled and disabled, using the setup menu (see
page 8).
D
Light sensor — This sensor monitors ambient light level and adjusts screen brightness,
based on the settings configured using the setup menu (see page 8).
figure 12
LCD screen
Motion sensor
Communication LED
Light sensor
A LCD screen
B
Motion sensor
C
Communication LED
D Light sensor
E
Activation Switch (see next
page)
F
Speaker (see the next page)
TLP Pro 725C Series Touchpanels • Panel Features 16