3.
If DHCP is disabled, set the unit IP address, subnet mask, gateway address, and DNS
server address.
a.
Press the button for the address to be edited. A screen opens, showing the address
and a numerical keypad. By default, the first octet is selected.
IP Address
1 9 2
1 6 8
2 5 4
2 5 2
Back
0
1
4
7
3
6
9
8
5
2
Clear
Cancel
OK
Figure 17.
Numeric Pad for Setting IP Addresses
b.
Enter the 3‑digit value for each octet (leading zeroes in the octet are ignored).
NOTES:
•
Octets can have any value between
0
and
255
.
•
If you attempt to enter an invalid number, for example
892
, you are able to
enter the
89
but the
2
cannot be entered.
•
When a valid 3‑digit value is entered, the next octet is automatically selected.
c.
Press
OK
to save the changes and return to the
Network
screen or press
Cancel
to
return to the
Network
screen without saving the changes.
figure 17
4.
If you have changed any of the values in the
Network
screen, the background color of the
button changes to blue (see figure 18, top).
Press
Apply
to apply the new values or press
Revert
to return to the previous values without
saving the changes. The button returns to gray
(see figure 18, bottom).
If you have not made any changes, the
Apply
and
Revert
buttons are grayed out.
0.0.0.10
0.0.0.10
Unsaved
Saved
Figure 18.
IP Address unsaved (top)
and saved (bottom)
TLC Pro 526M, 726M, and 1026M Series TouchLink Pro Control Systems • On-screen Menus
18
