Extron electronics Quantum Connect 82, Руководство пользователя

Страница: 34 / 93

Quantum Series Videowall Processing Systems • Installation and Maintenance 26
Input Cards
Analog and digital video sources such as computers, cameras, Blu-ray™ or DVD players,
and video servers are input to the Quantum processor through one or more of the
Quantum input cards. These cards provide digitization, deinterlacing, and down-scaling of
sources as well as full source auto-detection.
Input card locations
Any combination of the four input card types can be installed in the slots available for
inputs as follows:
• Quantum Elite 615 — Slots 2 through 14, plus slot 0 if all the other slots in the card
frame are full, enabling up to 14 input cards to be installed.
• Quantum Elite 408 — Slots 1 through 7.
•
Quantum Connect
— Slots 3 through 6 (Connect 84) or slots 4 through 7
(Connect 82) are preconfigured with HDMI input cards that cannot be replaced.
NOTES:
•
At least one input card is required.
•
Slot 15 on the Elite 615 and slot 8 on the Elite 408 and Connect can contain only
output cards. They cannot be used for inputs.
•
If your Quantum Elite has multiple types of input cards, the cards must be
installed in the following order, from
right to left :
1. SDI (installed to the left of the last output card)
2. HDMI (installed to the left of the last SDI card)
3. DVI (installed to the left of the last HDMI card)
4. RGB/YUV (installed to the left of the last DVI card)
5. Video/S-video (installed to the left of the last RGB card)
All cards of the same signal type must be placed next to each other in the card
frame.
•
The number of sources that can be displayed simultaneously depends on the
rectangulation of the output cards (see
Output Cards on page 39).
EDID management
The Quantum EDID Minder manages the EDID for all the inputs. By default, input EDID
is set to 1920x1200 @ 60 Hz. In addition, the user assigned mode allows pre-stored
EDIDs, based on user selected resolutions, to be manually assigned to the sources. By
maintaining continuous EDID communication with all sources, EDID Minder ensures that
all sources power up properly and maintain their video outputs whether or not they are
actively connected to the display device through the Quantum outputs.
Alternatively, you can set the EDID properties for each of the inputs installed in your
Quantum card frame using the Quantum Control Software. The software also lets you
view the current EDID that has been set for each input. The following EDIDs can be
selected for an input at 50 or 60 Hz:
• 640x480 • 1280x768 • 1366x768 • 1600x1200
• 800x600 • 1280x800 • 1440x900 • 1920x1200*
• 848x480 • 1280x1024 • 1400x1050 • 720p
• 1024x768 • 1360x768 • 1680x1050 • 1080p
• Current display EDID (on output 1)
*Default