QGE 100 • Software Configuration and Control
42
2.
Enter any desired values in the fields as described in the table below:
Field
To enter a value:
Key
Combination
to
End
Mouse
&
Keyboard
Input
Click in this field, then press the key or key
combination that will be used to terminate the
current mouse and keyboard control session.
Default: <Ctrl> + <F1>
NOTE:
Pressing this key combination does not
disable keyboard and mouse control
entirely. The option remains checked
on the
Tools
menu, and if you click
anywhere on the Administrator Viewer
window or the QGE 100 Viewer source
pane, keyboard and mouse control is
reestablished.
(You can also select
End
Keyboard
And
Mouse
from the
Special Context menu
.)
Key
Combination
to
Show
Mouse
&
Keyboard
Context
Menu
Click in this field, then press the key or key
combination that will be used to display the
Special
Context
pop-up menu.
From this menu you can select special commands
to send to the source computer, or end mouse
and keyboard control. Default: <Ctrl> + <F2>
Enable
Timeout
Select this check box to enable automatic
termination of a keyboard and mouse control
session after a specified number of seconds.
Timeout
in
Seconds
If the
Enable
Timeout
check box has been
selected, enter the number of seconds after
which mouse and keyboard control of the source
computer will time out.
3.
Click
OK
to close the Mouse and Keyboard Options dialog and implement the settings.
