Installation, cont’d
4
.
Be sure to include the AAP connectors as part of the
installation pretest before final installation of the faceplate.
5
.
For more detailed installation information, refer to the
installation guide shipped with the device.
N
The PVT transmitter should be cabled and tested
before it is finally installed into the wall or device face
plate, as the rear panel connections will be inaccessible
after installation.
6
.
After testing and making any adjustments, turn off the
power supply to the PVS 204SA, and carefully secure the
faceplate on the wall box device.
7
.
Reconnect the cables and turn on the power supply to the
PVS 204SA. This powers up the AAP plates.
Connections and Settings
C
Do not connect these devices to a computer data or
telecommunications network.
Front panel features
The front panel features are the same within these groups:
a) PVT CV D and PVT CV AAP, and
b) PVT RGB D and PVT RGB AAP:
AUDIO IN
L
R
VIDEO IN
1
2
3
PVT CV D
PVT CV AAP
AUDIO IN
L
R
VIDEO
IN
PVT CV
1
2
3
PVT RGB AAP
PVT RGB D
COMPUTER IN
AUDIO IN
1
4
5
COMPUTER
IN
AUDIO IN
5
4
1
Figure 2-4 — PVT series front panel features
PVT Series (D and AAP models) • Installation
2-6
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
