a
Dual color power LED (all models) —
This LED lights
amber when power only (no signal) is applied to the PVT,
and green when power and signal are both present.
b
Audio (left and right) input
(C� D and C� AAP models)
—
For unbalanced left and right audio input, plug male
RCA audio plugs into these two female RCA jacks
(white = left, red = right).
Tip (+)
Sleeve ( )
Sleeve (Gnd )
Right Channel
(Red Jacket)
Left Channel
(White Jacket)
Tip (Signal)
Figure 2-5 — RCA audio connectors
c
Composite video input (C� D and C� AAP models) —
To input a composite video signal from a suitable
source, insert a male RCA plug into this yellow female
RCA jack.
d
Audio input
(RGB D and RGB AAP models)
— Plug a
3.5 mm stereo audio plug into this jack for unbalanced
audio input. Wire the plug as shown in figure 2-6.
N
Figure 2-6 shows a typical audio connector,
which consists of the tip, ring, and sleeve.
Sleeve ( )
Ring (R)
Tip (L)
Figure 2-6 — 3.5 mm stereo audio plug
e
RGB video input (RGB D and RGB AAP models) —
Connect a computer video source to this 15-pin
HD connector for high resolution RGB video
input.
AUDIO IN
2-7
PVT Series (D and AAP models) • Installation
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
