Rear panel features
All models have the output connectors on the rear panel.
PVT CV models
Figure 2-7 — PVT CV models rear panel features
a
Composite video output —
For composite video output,
using
CAT 5 UTP cable,
c
onnect this RJ-45 female video output
port
to one of the two composite video RJ-45 input connectors
(labelled 3 and 4), on the rear panel of the PVS 204SA switcher.
Cable termination for PVT CV models
N
The PVT cable termination method is specific for
PVT transmitters working with the PVS 204SA
switcher. DO NOT connect to an MTP system.
N
RJ-45 termination with CAT 5, CAT 5e, CAT 6, and
Skew-Free A/V UTP cable must comply with the
TIA/EIA T 568A wiring standards for all connections.
N
For
composite video
signals, the RJ-45 connector must
be wired exactly as shown in figure 2-8, so that the input
video and audio signals are transmitted correctly.
PVT CV AAP
1
1
PVT CV D
Installation, cont’d
PVT Series (D and AAP models) • Installation
2-8
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
