FOXBOX Tx / Rx • Remote Control
35
Advanced Configuration panel
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
3
3
3
3
3
3
3
3
3
3
Figure 22.
Advanced Tab
Link Mode buttons
(see figure 22,
1
) — The
Link
Mode
radio buttons allow you to
enable and disable link 2 (the return to the transmitter).
Disable
is primarily used and
recommended when the transmitting device is a FOX 500 DA6 and the receiver is connect
to any of outputs 2 through 6 on the DA. These radio buttons are included in this guide for
completeness.
Executive Mode buttons
(
2
) — The
Executive
Mode
radio buttons have no effect on
the operation of the FOXBOX units.
Auto Memory checkbox
(
3
) — Click the
Auto
Memory
On
radio button to automatically
apply saved position, horizontal start, total pixels, and pixel phase settings when the sensed
input resolution changes.
Auto Image button
(
4
) — Click the
Auto
Image
button to adjust the output settings for
the best image, based on the sensed input resolution.
Test Patterns drop box
(
5
) — Select one of three built-in test patterns;
Colorbars
,
Grayscale
, and
Alternating
Pixels
; as necessary to help adjust the color, brightness/
contrast, and focus of the display. Select
Off
to output the video input to the transmitter.
NOTE:
You must have a video input connected and the transmitter-Tx-to-receiver-Rx
fiber cable connected and the receiver must be in the normal mode for the receiver to
output a selected test pattern.
The test pattern turns off if the input signal rate is changed or disconnected or if power
is removed.
Содержание FOXBOX Rx DVI MM
Страница 6: ......
Страница 8: ...FOXBOX Tx Rx Contents viii...