Extron electronics FOXBOX Rx DVI MM, Руководство пользователя, Страница: 35 / 50

Command and Response Table for SIS Commands (continued)
FOXBOX Tx / Rx • Remote Control 27
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Information requests
Information request
I 1Lnk
X1(
•
2Lnk
X1(
•
RGB
X1(
•
Aud
X1(
•
X2)
•
X2!]
The unit responds with the current status
(signal detected) of optical link 1, optical
link 2, the video input, and the audio
link; the fiber optic transmission mode
(singlemode or multimode); and the
device type (Tx or Rx).
NOTE:
The receiver monitors the primary (transmitter-TX to receiver-Rx) fiber cable. If the PC is connected to the transmitter and the
receiver-Tx-to-transmitter-Rx fiber cable is not connected, for the
I
and
1S
commands, the transmitter reports
1lnk0
regardless of
the status of the primary cable.
Show firmware version
Q
X2@]
Example: Q 1
.
23
] The factory-installed firmware version is
1.23 (sample value only).
Request part number
N 60-
nnn - nn
] See www.extron.com .
Request part number of other unit 1N 60-
nnn - nn
]
See
www.extron.com
.
Show link 1 status 1S
X1(]
Light status on transmitter-Tx-to-
receiver-Rx cable.
Show link 2 status 2S
X1(]
Light status on receiver-Tx-to-
transmitter-Rx cable.
Show input video status 3S
X1(]
Show transmitter video input status.
Show input audio status 4S
X1(]
Show transmitter audio input status.
Show temperature
20S
X2#]
Show temperature in degrees Fahrenheit
and Celsius
Resets
Reset audio E
ZA
}
Zpa
] Reset audio setting to default levels
(0 dB gain).
Reset memory presets E
ZG
}
Zpg
] Reset (erase) all memory presets.
System reset E
ZXXX
}
Zpx
] Reset all settings to factory defaults.
NOTE:
X1(
= Link and input status
0
= link or input not sensed
1
link or input sensed
X2)
= Transmission mode
SM
= singlemode
MM
= multimode
X2!
= Transmitter or receiver
Tx
= transmitter
Rx
= receiver
X2@
= Firmware version v . vv
X2#
= Internal temperature nnn
F
• nn
C