Extron electronics FOXBOX Rx DVI MM, Руководство пользователя, Страница: 32 / 50

Command and Response Table for SIS Commands (continued)
FOXBOX Tx / Rx • Remote Control 24
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Horizontal shift
Set a horizontal position
X&
H Hph
X&]
Set horizontal centering to X& .
Increment position
+
H
Hph
X&] Shift the image one pixel to the right.
Decrement position –H Hph
X&]
Shift the image one pixel to the left.
Show position
H
X&]
Vertical shift
Set a vertical position
X&
/ Vph
X&]
Set vertical centering to X& .
Increment position
+/ Vph
X&]
Shift the image down one line.
Decrement position
–/
Vph
X&]
Shift the image up one line.
Show position
/
X&]
Horizontal start
NOTE:
When the controlling PC is connected to the receiver, the FOXBOX can perform this command only if the receiver-Tx-to-
transmitter-Rx fiber cable is connected. The unit returns the E14 error if the Rx fiber is not connected.
Set a start position
X*
) Hst
X*]
Set the horizontal location of the first
active pixel.
Example:
128)
Hst128
]
Set pixel 128 as the first active pixel.
Increment start position
+) Hst
X*]
Increase the horizontal start location
value.
Decrement start position
–)
Hst
X*]
Decrease the horizontal start location
value.
Show start position
)
X*]
Pixel phase
NOTE: When the controlling PC is connected to the receiver, the FOXBOX can perform this command only if the receiver-Tx-to-
transmitter-Rx fiber cable is connected. The unit returns the E14 error if the Rx fiber is not connected.
Set a pixel phase value
X(
U Phs
X(]
Set the pixel phase value to
X(
.
Example:
10U Phs10
]
Set the pixel phase value to 10.
Increment pixel phase
+U
Phs
X(]
Increase pixel phase value by 1.
Decrement pixel phase
–U
Phs
X(]
Decrease pixel phase value by 1.
Show pixel phase
U
X(]
Total pixels
NOTE:
When the controlling PC is connected to the receiver, the FOXBOX can perform this command only if the receiver-Tx-to-
transmitter-Rx fiber cable is connected. The unit returns the E14 error if the Rx fiber is not connected.
Set a total pixel value
11*
X1)
#
Tpx
X1)] Set the total pixels to a specific value.
Example: 11*1555# Tpx1555
]
Set the total pixel value to
1555
.
Increment total pixel value +11
#
Tpx
X1)]
Increase total pixels by 1 pixel.
Decrement total pixel value
–11# Tpx
X1)] Decrease total pixels by 1 pixel.
Show total pixel value 11# Tpx
X1)]
NOTE:
X&
= Horizontal and vertical position 000 through 255
X*
= Horizontal start 000 through 255
X(
= Pixel phase 00 through 31
X1)
= Total pixels ± 255 of default value for selected resolution