Extron electronics FOXBOX Rx DVI MM, Руководство пользователя, Страница: 22 / 50

FOXBOX Tx / Rx • Installation and Operation 14
Q
Configuration port (see figure 4 on page 11) — Connect a controlling device, such as
a PC, to this port via a 2.5 mm mini jack TRS RS-232 cable for RS-232 protocol control
of all FOXBOX functions. See
Front panel Configuration ports on page 17 for more
details on the adapter cable and Remote Control on page 20 for SIS commands and
software control.
The TRS RS-232 cable is included with the Tx models.
R
DC power connector (see figure 4 ) — Plug the included external 12 VDC power
supply into this connector (see Power supply wiring on page 18 to wire the connector).
S
Indicators (see figure 4 ) —
Power LED —
Indicates that power is applied to the unit
.
Over Temp LED — Indicates that the unit is operating at a dangerously high
temperature (approximately 167 °F [75 °C]) and that equipment damage is imminent.
RGB (FOXBOX VGA) or DVI (FOXBOX DVI) LED
— Indicates on the receiver that the
transmitter detects a signal on its video input, as follows:
RGB LED — Horizontal sync (H) (for RGBHV video) or Green (Sync on green) (G)
(for RGsB or RsGsBs video)
RGB/YUV LED — Horizontal sync (H) (for RGBHV video) or luminance (Y) (for
component video)
DVI LED — DVI video input
Audio LED
— Indicates on the receiver that the transmitter detects a low level audio
signal for a short period of time. It goes dark if the audio signal drops below the
minimum threshold for a short period of time.