4-19
IPL T PCS4 • Web Page-Based Setup and Control
PRELIMINAR
Y
Scheduling receptacles by day of the week
There are two types of schedules that you can set up for one day of the week. The
two setup procedures are described below.
All receptacles on and off
Follow this procedure to select both the powering on and powering off times for
all desired receptacles on one day of the week.
1
.
Click on a day of the week at the top of a column in the scheduling table.
Two Set Schedule For fields open, one for Power ON and one for Power OFF.
These fields contain pull-down menus for selecting powering on and off
times, as well as check boxes for selecting the receptacles you want to
schedule.
Schedule screen showing fields for daily receptacle scheduling
2.
In either the Power ON or Power OFF section, select the hours, minutes, and
AM/PM from the menus; and select the check box(es) for the receptacle(s)
that you want to schedule.
3
.
In the section in which you made your selections, click Set to enter your
choices. The field in which you made your selections closes.
4
.
If desired, repeat steps
2
and
3
in the other Set Schedule For field.
If you do not want to make selections in the remaining Set Schedule For
field, click Refresh to close the field.
If you do not click Set before making any selections in the other field, the
second field selections override those that you entered in the first.
5
.
Repeat steps
1
through
4
for any additional days that you want to schedule.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
