4-5
IPL T PCS4 • Web Page-Based Setup and Control
PRELIMINAR
Y
2
.
Right-click Local Area Connection, then select Properties.
3
.
Select Internet Protocol (TCP/IP), and click the Properties button. If Internet
Protocol (TCP/IP) is not on the list, it must be added (installed). Refer to the
Windows user’s manual or the Windows online help system for
information on how to install the TCP/IP protocol.
4
.
Write down your PC’s current IP address and subnet mask below. You will
need to restore these settings to the PC later.
If
Obtain an IP address automatically
has been selected, make a note of
that. If not, write down the following:
IP address:
__________________________
Subnet mask:
__________________________
5
.
Change the PC’s IP address temporarily so that it can communicate
with the PCS4.
a
.
Select the “Use the following IP address:” radio button.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
