Extreme Networks Summit X150 Series, Руководство по установке оборудования

Страница: 203 / 512

Using the SummitStack-V Feature
Summit Family Switches Hardware Installation Guide
203
Summit X440 series switches:
If ports 25 and 26 or 49 and 50 are used as alternate stacking ports, those ports are not available to use
as data ports.
NOTE
The X440-L2-24t and X440-L2-48t do not have any stacking capability.
Summit X450a and X450e series switches:
To use the SummitStack-V feature, you must install one of the following port option cards to add
10-Gbps ports to the switch.
●
XGM2-2xf option card
●
XGM2-2xn option card
●
XGM2-2sf option card
●
XGM2-2bt option card
Summit X460 Series Switches:
To use the SummitStack-V feature, you must install an XGM3-2sf, XGM3S-2sf, or XGM3S-2xf port
option card to add 10-Gbps ports to the switch.
Summit X480 series switches:
● Summit X480-48t and X480-48x switches do not have 10-Gbps ports on the base model switch. To use
the SummitStack-V feature on these switches, you must install either a VIM2-10G4X module (ports
S3 (51) and S4 (52) can then be configured as alternate stacking ports). Alternate stacking ports are
not supported with the VIM3-40G4X.
●
On a Summit X480-24x with an installed VIM2-10G4X module, you can configure ports S3 (29) and
S4 (30) as alternate stacking ports for the SummitStack-V feature. If you use a VIM3-40G4X module
for stacking, ports 25 and 26 are configured as the alternate stacking ports.
●
On a Summit X480-24x switch with no installed VIM2 module, you can configure ports 25 and 26 on
the switch front panel as alternate stacking ports.
●
On a Summit X480-24x switch with installed native stacking ports on a VIM2 module, you can do
either of the following:
- Configure both ports 25 and 26 on the switch front panel as alternate stacking ports.
- Configure one alternate stacking port on the switch front panel and use a native stacking port on
the installed VIM2 module.
Summit X650 series switches:
●
Summit X650 series switches must always have an installed VIM1 or VIM3 module.
●
If a VIM1-SummitStack or VIM1-SummitStack256 module is installed, ports 23 and 24 on the switch
front panel can be configured as alternate stacking ports.
●
If a VIM1-10G8X module is installed, ports 31 and 32 on the VIM1-10G8X module can be configured
as alternate stacking ports.
●
If a VIM3-40G4X module is installed, ports 23 and 24 can be configured as the alternate stacking
ports.