Extreme Networks Summit X150 Series, Руководство по установке оборудования

Страница: 191 / 512

Summit Family Switches Hardware Installation Guide
191
C H A P T E R
5
Building a SummitStack
Configuration
This chapter provides information about how to build and connect a SummitStack configuration. If you
intend to use the SummitStack feature, read this chapter before installing the set of Summit family
switches that will be included in the SummitStack configuration.
For instructions to install Summit family switches in equipment racks, see Chapter 6 .
The chapter includes the following topics:
●
Stacking Summit Family Switches on page 191
●
Placing Summit Family Switches for Stacked Operation on page 200
●
Connecting the Switches to Form the Stack Ring on page 204
●
Connecting Stacking Cables on page 218
●
Connecting Console Ports for a Stack on page 228
● Management Port Cabling on page 229
● Stacking Port LEDs on page 229
Stacking Summit Family Switches
A stack consists of a group of up to eight Summit switches that are connected together to form a
connected ring, as shown in
Figure 140 on page 192 . The stacking connections can be made in either of
the following ways:
●
Using dedicated stacking connectors on the back of the switch; these ports are called native stacking
ports.
●
Using stacking-enabled 10-Gbps Ethernet ports, either at the front of the switch or on installed
option cards at the back of the switch. This type of stacking is called SummitStack-V stacking (see
“Using the SummitStack-V Feature” on page 200 ).
The stack can combine any Summit series switches that include support for stacking, as long as you
follow port compatibility and cabling recommendations. See
“Placing Summit Family Switches for
Stacked Operation” on page 200 and “Connecting the Switches to Form the Stack Ring” on page 204 for
more information about combining switches from different Summit series.