Extreme Networks Summit WM20 Скачать руководство пользователя

Страница: 209 / 270

Performing Summit WM Controller Software Maintenance

Summit WM20 User Guide, Software Release 4.2

209

The

Available Backups

section displays the list items that have been backed up and are available.

In the

Restore

section, select an item from the

Select an image to use

drop-down list.

To launch the backup with the selected items, click on the

Restore Now

button.

In the dialog box that is displayed, confirm the restore. The image is restored.

To download for restore:

From the main menu, click

Summit Switch

. The

Summit Switch Configuration

screen is displayed.

From the left pane, click

Software Maintenance

. The

System Maintenance

screen is displayed.

Click the

Restore

tab.

To download an image for restore, which will be added to the list, in the

Download for Restore

section type the following:

●

FTP Server

–The FTP server to retrieve the image file from.

●

User ID

– The user ID that the controller should use when it attempts to log in to the FTP server.

●

Password

– The corresponding password for the user ID.

●

Confirm

– The corresponding password for the user ID to confirm it was typed correctly.

●

Directory

– The directory on the server in which the image file that is to be retrieved is stored.

●

Filename

– The name of the image file to retrieve.

●

Platform

– The AP hardware type to which the image applies. The are several types of AP and

they require different images.

Click

Download

. The image is downloaded and added to the list.

Содержание Summit WM20















































































































































































































































































Результаты поиска

Содержание Summit WM20

Отзывы:

Похожие инструкции для Summit WM20

Бренды по названию

Популярные бренды

Extreme Networks Summit WM20, Руководство пользователя

Результаты поиска

Содержание Summit WM20

Отзывы:

Похожие инструкции для Summit WM20

Бренды по названию

Популярные бренды