Extreme Networks Summit WM20, Руководство пользователя

Страница: 157 / 270

Defining Management Users
Summit WM20 User Guide, Software Release 4.2
157
When the failed Summit WM Controller recovers, each Summit WM Controller in the pair goes back to
normal mode. They exchange information that includes the latest lists of registered Wireless APs. The
administrator must release the Wireless APs manually on the second Summit WM Controller, so that
they may re-register with their home Summit WM Controller. Foreign APs can now all be released at
once by using the
Foreign button on the Access Approval screen to select all foreign APs, and then
clicking Released .
To support the availability feature during a failover event, administrators need to do the following:
1 Monitor the critical messages for the failover mode message, in the information log of the remaining
Summit WM Controller (in the
Reports and Displays section of the Summit WM Controller).
2 After recovery, on the Summit WM Controller that did not fail, select the foreign Wireless APs and
click on the
Release button on the Access Approval screen.
Defining Management Users
In this screen you define the login user names that have access to the Summit WM GUI, either for
Summit WM Controller, Access Points and Software administrators with read/write privileges, or users
with read only privileges. For each user added, you can also define and modify a user ID and
password.
To add a Summit WM Controller management user:
1 From the main menu, click Summit Switch . The Summit Switch Configuration screen is displayed.
2 In the left pane, click the Management Users option. The Management Users screen is displayed.