Extreme Networks Summit WM20, Руководство пользователя

Страница: 161 / 270

Configuring Check Point Event Logging
Summit WM20 User Guide, Software Release 4.2
161
To enable and configure Check Point:
1 From the main menu, click Summit Switch . The Summit Switch Configuration screen is displayed.
2 In the left pane, click Check Point . The Check Point Configuration screen is displayed.
3 To enable check point logging, select the Enable Check Point Logging checkbox.
4
Type the following information:
● Check Point Server IP
– Specifies the IP address of the ELA Management Station
●
ELA Port – Specifies the port to use for ELA. The default port is 18187.
●
ELA Log Interval
– Specifies the amount of time (in milliseconds) you want the system to wait
before attempting to log once there is a connection between Summit WM Controller and the
Check Point gateway. The default is
100
milliseconds.
● ELA Retry Interval
– Specifies the amount of time (in milliseconds) you want the system to wait
before attempting a re-connection between Summit WM Controller and the Check Point gateway.
The default is
2000
milliseconds.
●
ELA Message Queue Size – Specifies the number of messages the log queue holds if the Summit
WM Controller and the Check Point gateway become disconnected. The default is 1000 log
entries.
●
SIC Name
– Specifies the Secure Internal Communication (SIC) Name, your security-based ID.
● SIC Password
– Specifies your Secure Internal Communication (SIC) password. You can use the
Unmask
button to display the password.
5 To save your changes, click Save .
6
To create the certificate to be sent to the ELA Management Station, click
Generate Certificate
button.
If the certificate is properly generated and the connection with the ELA Management Station is
made, the
Connection Status
section displays the following message:
OPSEC Connection OK