Extreme Networks Summit WM20, Руководство пользователя

Страница: 124 / 270

WM Access Domain Services Configuration
Summit WM20 User Guide, Software Release 4.2
124
5
For each filtering rule you are defining, do the following:
●
In the IP/subnet:port box, type the destination IP address. You can also specify an IP range, a
port designation, or a port range on that IP address.
●
In the
Protocol
drop-down list, select the applicable protocol. The default is N/A.
6
Define a rule to allow access to the default gateway for this WM-AD:
●
Select IP/Port.
●
Type the default gateway IP address (WM-AD IP address) that you defined in the
Topology
tab
for this WM-AD.
7
Click
Add
. The information is displayed in the
Filter Rules
section of the tab.
8 Select the new filter, then select the Allow checkbox applicable to the rule you defined.
9
Edit the order of a filter by selecting the filter and clicking the
Up
and
Down
buttons. The filtering
rules are executed in the order you define here.
10
To save your changes, click
Save
.
NOTE
For external Captive Portal, you need to add an external server to a non-authentication filter.
Defining Non-authenticated Filters
Defining non-authenticated filters allows administrators to identify destinations to which a user is
allowed to access without incurring an authentication redirection. Typically, the recommended default