Extreme Networks Summit Summit1i, Руководство по установке оборудования

Страница: 44 / 65

2-2 Summit Switch Hardware Installation Guide
Installation and Setup
rack-mounted in a wiring closet or equipment room. Two mounting brackets are
supplied with the switch.
When deciding where to install the switch, ensure that:
• The switch is accessible and cables can be connected easily.
• Water or moisture cannot enter the case of the unit.
• Air-flow around the unit and through the vents in the side of the case is not
restricted. You should provide a minimum of 25 mm (1 inch) clearance.
• No objects are placed on top of the unit.
• Units are not stacked more than four high if the switch is free-standing.
Installing the Summit Switch
The Summit switch can be mounted in a rack, or placed free-standing on a tabletop.
Rack Mounting
Caution: Do not use the rack mount kits to suspend the switch from under a
table or desk, or to attach the switch to a wall.
To rack mount the Summit switch, follow these steps:
1 If you are installing a Summit7i switch, mount the helper bracket in the rack using
four appropriate rack-mounting screws (not provided), as shown in Figure 2-1.
Note: Only the Summit7i switch uses the helper bracket. The helper bracket is
not required to rack mount a Summit4, Summit4/FX, Summit24, Summit48,
Summit1i, Summit5i, or Summit48i switch.