Extreme Networks Summit Summit1i, Руководство по установке оборудования

Страница: 45 / 65

Summit Switch Hardware Installation Guide 2-3
Installing the Summit Switch
Figure 2-1: Rack-mount helper bracket
2 Place the switch upright on a hard flat surface, with the front facing you.
3 Remove the existing screws from the sides of the case (retain the screws for Step 5).
4 Locate a mounting bracket over the mounting holes on one side of the unit.
5 Insert the screws and fully tighten with a suitable screwdriver, as shown in
Figure 2-2.
BDbrackt