Extreme Networks Summit Summit1i, Руководство по установке оборудования

Страница: 42 / 65

1-28 Summit Switch Hardware Installation Guide
Summit Switch Overview
GBIC Type and Hardware/Software Support
The switch supports two types of GBICs: the Parallel ID GBIC and the Serial ID GBIC.
The system uses identifier bits to determine the media type for the GBIC that is
installed. Initial ExtremeWare versions do not support Serial ID GBICs. If Serial ID
GBICs are installed in a switch with an initial software release, the switch will not bring
up the link on GBIC ports.
GBICs are used in these switches:
• Summit24
• Summit48
• Summit1i
• Summit5i
• Summit7i
• Summit48i
Port Status LEDs (bottom row for 100BASE-TX/1000BASE-T ports)
Color Indicates
Green
Yellow
Green flashing
Off
Link is present; port is enabled.
Frames are being transmitted/received on this port.
Link is present; port is disabled.
Link is not present.
100/1000 Mbps Speed LEDs (top row for 100BASE-TX/1000BASE-T ports)
Color Indicates
Green
Off
1000 Mbps
100 Mbps
10/100 Management Port LED (right of 10BASE-T/100BASE-TX Management Port on
Summit5i and Summit7i)
Color Indicates
Green
Yellow
Off
Link is present.
Frames are being transmitted.
Link is not present.
Table 1-5: Summit1i, Summit5i, Summit7i, and Summit48i Switch LED Behavior