Extreme Networks Summit Summit1i, Руководство по установке оборудования

Страница: 25 / 65

Summit Switch Hardware Installation Guide 1-11
Summit4, Summit24, and Summit48 Switch Rear View
Summit4, Summit24, and Summit48 Switch Rear
View
Figure 1-5 shows the rear view for the Summit4, Summit4/FX, Summit24, and
Summit48 switches.
Figure 1-5: Summit switch rear view
Power Socket
The Summit switch automatically adjusts to the supply voltage. The power supply
operates down to 90 V. The fuse is suitable for both 110 VAC and 220-240 VAC
operation.
Serial Number
Use this serial number for fault-reporting purposes.
Console Port
Use the console port (9-pin, “D” type connector) for connecting a terminal and carrying
out local management.
Redundant Power Supply Port
The redundant power supply (RPS) port is used to connect to a Summit RPS. The
Summit RPS provides a redundant, load-shared power source to the Summit. If the
primary power source for the switch fails, the RPS takes over, ensuring uninterrupted
network operation.
Console port RPS port Power socket and fuse
rear_Sum
Reset button