Extreme Networks EPICenter 5.0, Руководство пользователя

Страница: 187 / 208

Port Configuration Utility
EPICenter Concepts and Solutions Guide 187
• To retrieve the values from the
extremeFanStatusTable
variables for the Extreme Networks device
with IP address 10.205.0.99, with the default read community string (public) and a default timeout,
enter the following command:
snmpcli snmpwalk -a 10.205.0.99 -o .1.3.6.1.4.1.1916.1.1.1.9
This returns the following:
IP Address: 10.205.0.99
Read community string: public
Timeout(ms): 500
OUTPUT:
OID: .1.3.6.1.4.1.1916.1.1.1.9.1.1.1 ; VALUE: 1
OID: .1.3.6.1.4.1.1916.1.1.1.9.1.1.2 ; VALUE: 2
OID: .1.3.6.1.4.1.1916.1.1.1.9.1.1.3 ; VALUE: 3
OID: .1.3.6.1.4.1.1916.1.1.1.9.1.2.1 ; VALUE: 2
OID: .1.3.6.1.4.1.1916.1.1.1.9.1.2.2 ; VALUE: 2
OID: .1.3.6.1.4.1.1916.1.1.1.9.1.2.3 ; VALUE: 2
Port Configuration Utility
The Port Configuration utility is a stand-alone utility that runs on the Windows 2000, or Windows XP
platform.
The EPICenter Port Configuration utility provides a way for an EPICenter administrator to change some
of EPICenter’s logical TCP/IP port numbers, in the event that there are conflicts between these port
numbers and those used by other software products running on the same system. Because these port
conflicts may prevent EPICenter from running, the port configuration capability needs to be accessible
outside of EPICenter. The Port Configuration application runs on the same system as the EPICenter
Database Server and Web Server.
You can run the utility from the Programs menu. You do not need to shut down the EPICenter services
(Web Server or database) in order to change the port configurations. However, the new configurations will
not take effect until you restart the affected server(s).
To run the Port Configuration utility, do the following:
1 Run the program from the Windows Start menu:
Select Programs , then Extreme Networks , followed by EPICenter 5.0 , then Port Configuration .
The EPICenter Port Configuration window appears, as shown in Figure 72.