manualshive.com logo in svg

Extreme Networks EPICenter 5.0, Руководство пользователя

Поделиться
Скачать
Extreme Networks EPICenter 5.0 Скачать руководство пользователя страница 172

 

172

EPICenter Concepts and Solutions Guide

Troubleshooting

will be asked to enter some information about yourself, and the license key will be sent to you by return 
e-mail. Follow the instructions in the 

EPICenter Installation and Upgrade Note 

or the 

EPICenter Release Notes 

to add this license to your EPICenter installation. 

VLAN Manager

Problem: Multiple VLANs have the same name.

A VLAN is defined by the name, its tag value, and its protocol filter definition. EPICenter allows multiple 
VLANs of the same name if one of the defining characteristics of one VLAN is different from the other. 

Problem: Multiple protocols have the same name.

EPICenter allows multiple protocols of the same name if one of the defining characteristics of one protocol 
is different from the other.

Problem: Created a new protocol in VLAN Manager, but the protocol does not appear on any switch.

When a new protocol is created, it is stored in the EPICenter database. EPICenter only creates the protocol 
on a switch when the new protocol is used by a VLAN on that switch. 

Problem: Can only access one of the IP addresses on a VLAN configured with a secondary IP 
address. 

EPICenter does not currently support secondary IP addressing for a VLAN.

Problem: Configuration fails when attempting to configure a VLAN with a modified protocol 
definition. 

EPICenter does not have a mechanism to modify protocols. When a VLAN is configured through 
EPICenter to use a protocol that does not exist on the switch, the protocol is first created on the switch. 
However, if a protocol with the same name but a different definition already exists on the switch, the 
operation will fail. 

Problem: An untagged port has disappeared from its VLAN.

Check to see if the port has been added as an untagged port to a different VLAN. In EPICenter, adding an 
untagged port to a VLAN automatically removes the port from its previous VLAN if the port was 
untagged, and the new and old VLANs used the same protocol. You should receive a warning message 
when this happens, which lets you proceed with the auto-deletion or cancel the operation. This is different 
behavior from the ExtremeWare CLI, where you must first delete the port from the old VLAN before you 
can add it to the new VLAN.

Problem: When you delete a VLAN, the VLAN remains in the VLAN tree, but with no members

EPICenter does not immediately clean up the VLAN tree. It can take up to 24 hours before the VLAN will 
disappear from the tree. 

Содержание EPICenter 5.0

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды