Extreme Networks EPICenter 5.0, Руководство пользователя

Страница: 125 / 208

Using the MIB Poller Tools
EPICenter Concepts and Solutions Guide 125
Table OIDs are defined in
<oid ... >
statements, included between
<table>
and
</table>
statements. OIDs from different tables must be put in separate
<table>
statements. The label portion of
the statement appears in the MIB Collections Detail report, and as a heading in the exported data file.
Scalar OIDs are defined in
<oid ... >
statements included between a
<scalar>
and
</scalar>
statement.
The devices that should be polled are specified by IP address in <
scope ipAddress ...>
statements,
one for each IP address.
The completed file must be named
collections.xml
, and placed in the user/collections directory. The
Reload button in the MIB Poller Summary report will load the collections.xml specification, and begin
the collection process if the
initialState
property specifies “running.”
Figure 56 on page 129 shows an example of an actual
collections.xml
file.
The MIB Poller Summary
If a
collection.xml
file has been loaded, the MIB Poller Summary shows the names of the collections
defined in the xml file, along with their status (running or stopped). Figure 53 shows the summary for a
a set of three collections.
Figure 53: The MIB Poller Collection Summary
From this page, any user can view the details of the collection, view information about the devices on
which data is being collected, view the xml file that defines the collections, and export the current
results of the collection.