Extreme Networks EAS 100-24t Switch, Руководство по установке оборудования

Страница: 17 / 40

Extreme Networks EAS 100-24t Switch Hardware Installation Manual
17
C H A P T E R
2
Installation
Package Contents
Open the shipping carton of the switch and carefully unpack its contents. The carton should contain the
following items:
●
One stand-alone switch
●
Rack mounting kit (two brackets and screws)
●
Four rubber feet with adhesive backing
●
DCE RS-232 console cable
If any item is missing or damaged, please contact your local reseller for a replacement.
Before You Connect to the Network
The site where you install the switch may greatly affect its performance. Please follow these guidelines
for setting up the switch.
●
Install the switch on a sturdy, level surface that can support at least 2.61kg (5.75lbs) of weight. Do
not place heavy objects on the switch.
●
The power outlet should be within 1.82 meters (6 feet) of the switch.
●
Visually inspect the power cord and see that it is fully secured to the AC/DC power port.
●
Make sure that there is proper heat dissipation from and adequate ventilation around the switch.
Leave at least 10 cm (4 inches) of space at the front and rear of the switch for ventilation.
●
Install the switch in a fairly cool and dry place for the acceptable temperature and humidity
operating ranges.
●
Install the switch in a site free from strong electromagnetic field generators (such as motors),
vibration, dust, and direct exposure to sunlight.
●
When installing the switch on a level surface, attach the rubber feet to the bottom of the device. The
rubber feet cushion the switch, protect the casing from scratches and prevent it from scratching other
surfaces.