background image

 

Chapter 1: Introduction

Extreme Networks EAS 100-24t Switch Hardware Installation Manual

12

NOTE

The SFP combo ports on the switch cannot be used simultaneously with the corresponding 1000BASE-T 

ports. If both ports are in use at the same time (ex. port 21 of the SFP and port 21 of the 1000BASE-T), the SFP 
ports will take priority over the combo ports and render the 1000BASE-T ports inoperable.

LED Indicators

The switch supports LED indicators for Power, Console, and Link/Act/Speed. The following shows the 
LED indicators for the three switches along with an explanation of each indicator. 

Figure 1: LED Indicators on EAS 100-24t Switch

Per Device:

EAS 100-24t (LED Per 10/100/1000 Mbps Port):

LED Indicator

Color

Status

Description

Power

Green

Solid Light

Power ON

Light off

Power OFF

Console

Green

Solid Light

Console on

Light off

Console off

LED Indicator

Color

Status

Description

Link/Act/Speed

Green/
Orange

Solid Green

When there is a secure 1000Mbps Ethernet connection 
(or link) at any of the ports.

Blinking Green

When there is reception or transmission (i.e. Activity—
Act) of data occurring at a Fast Ethernet connected 
port.

Solid Orange

When there is a secure 10/100Mbps Ethernet 
connection (or link) at any of the ports.

Blinking Orange

When there is reception or transmission (i.e. Activity—
Act) of data occurring at an Ethernet connected port.

Light off

No link.

Содержание EAS 100-24t Switch









































Отзывы: