28.
Disassemble the tailwheel assembly and use a rotary tool or a small file to create a
flat spot on the tailwheel wire for the set screws in the aluminum cap to seat against.
Reassemble the unit and apply Loctite to the threads on the setscrews. Slide the
tailwheel onto the wire and secure with the included wheel collars.
29.
Position the tailwheel assembly on the rear bottom of the fuselage, making sure the
tailwheel wire is aligned with the rudder hinge line. Use some blue painters tape to
hold the assembly in place while you drill 3 holes with a 1/16” drill bit. Apply a few
drops of thin CA to the holes and secure the assembly to the bottom of the fuselage
with the 3 provided coarse thread wood screws and 3 washers.
23
