Extreme Flight Muscle Bipe ARF, Инструкция по сборке

Страница: 32 / 38

24. The quick mount/release components make assembling and disassembling
your Muscle Bipe very fast at the flying field. Start by sliding the stab tube
and anti-rotation rod into the fuselage and make sure the silver knob is in the
rear position. Now slide both stabs onto the tube and connect the servo lead to
the extension in the fuselage. Push the stabs into position. Pull out on the
spring loaded knob and slide it forward until it sinks into the recess. Do the
same for the other side. You may find it necessary to apply a bit of pressure to
the opposite side when fastening the second half. You can adjust the bolt in the
root of the stab if necessary for best fit, but typically it is setup in the ideal
position from the factory.
31