Extreme Flight Muscle Bipe ARF, Инструкция по сборке

Страница: 36 / 38

27. The forward hatch is installed by laying it on the forward fuselage top,
making sure the bolts on the bottom fit into the keyhole shaped openings, then
pushing the hatch forward until it mates with the F1 former. To install the
canopy, open the carbon fiber hatch latches on each side of the fuselage, place
the canopy into position. You will notice there is a bolt protruding from the
top of the turtledeck. As you push the canopy into place, apply some back
pressure on the rear of the canopy so that the protruding bolt fits into the slot
on the rear top of the hatch. This insures the rear of the canopy sits flush
against the fuselage. Close both carbon canopy latches.
35