Extreme Flight Muscle Bipe ARF, Инструкция по сборке

Страница: 12 / 38

4. While you are gluing, go ahead and affix the rudder to the fuselage, by
applying glue to the hinge holes in the rudder post and to the hinges in the
rudder. Push into place, ensuring minimal gap, and wipe away any excess
glue, paying close attention to the hinge knuckles.
5. Next we'll install servos into the elevators and ailerons and assemble the
linkages as shown in the pictures. We use the Extreme Flight Xcessories black
socket head servo screws to affix the servos to the airframe (link below).
https://extremeflightrc.com/Socket-Head-Servo-Screws--Qty-100_p_3488.html
While the upper wing servos require no servo extensions for the servo lead to
reach the root, the bottom wings will require a 12 inch extension. Attach this
extension to the servo lead and secure with a servo safety clip or heat shrink
tubing before installing the aileron servo into the wing.
Be sure to apply Blue Loctite to all nuts and bolts! There are conical spacers
included in the linkage kits which go between the ball link and metal servo arm
to prevent binding. Also be sure to place a washer on the outer side of each
G10 control horn.
11