17
9. Next we will install the tailwheel. Notice there is a 3mm hole in the bottom
of the rudder about 3" inches from the hinge line. Remove the covering over
this hole and then glue the included ball link into this hole with epoxy. You
will also notice that the mounting plate for the tailwheel assembly is recessed.
Remove the covering from this area to expose the mounting plate and 3
mounting holes. Use 3 of the included 3mm bolts to install the tailwheel
assembly to the fuselage, using blue Loctite on each bolt. Before installing the
tailwheel assembly we highly recommend that you remove all set screws in the
unit and apply blue Loctite to each of them before reassembly.
