15
7. Slide the landing gear cuffs into place against the fuselage and secure with
Goop style silicon glue. Tape in place until glue is fully cured.
8. Insert the axles into the holes on the landing gear leg and secure with a
washer and lock nut. Grind a flat spot on the axles to fasten the set screw
against providing a better grip. Now install one wheel collar, the wheel then
the other wheel collar but don’t tighten. Position the wheel pant onto the axle
and determine the exact position of the inner and outer wheel collars such that
the tire will not rub against the wheel pant. Once you have this location add
blue thread lock to the set screw and tighten the wheel collars. Now position
the wheel pant(s) onto the axle/gear and secure with the 3mm bolts/washers
and use blue thread lock on these as well.
