Extreme Flight 104 Laser EXP ARF, Инструкция по сборке

Страница: 25 / 30

elevators/ailerons. We used the outer hole on the 2” servo arm. Note: if you did not insert
the tailwheel tiller arm into the ball link earlier in this step make sure to do that now
before connecting the remaining ball link into the control horn. Also be sure to recheck
the Rudder hinge pin located on the top of the rudder, add some BTL and be sure not to
over tighten. We recommend you preflight this at least before each flying session. See
figures 30-34 for help with this step.
Figure 30
Figure 31