Extreme Flight 104 Laser EXP ARF, Инструкция по сборке

Страница: 8 / 30

5.
Figure 3
Figure 4
6. Next we will install the servo and linkage setup. Locate your servo, servo arm and all the
hardware, see figure 1, for the horizontal stabilizer/elevator. We begin by installing the
servo into the horizontal stabilizer, you will note the slot within the servo bay is oriented
to the trailing edge, this is for your servo wire as your servo output shaft will be oriented
to the trailing edge of the horizontal stabilizer. Secure your servo with servo screws
provided by your servo manufacturer, or we recommend using the EF servo screws as
they have an allen head and are black which gives a very nice finished look and much
easier to work with than a Phillip's head screw. Once you have the servo mounted, it will
require a 48” extension to plug it into your receiver, then center it. Now install the 2” EF
servo arm as close to straight up and down as possible, use your transmitter subtrim or
centering feature to ensure the arm is perpendicular to the hinge line and elevator at its’
neutral position. Now secure the arm onto the servo and we use blue thread lock (BTL) for
all bolts in this section. Now thread the ball links onto the pushrod, note that one end has
right hand threads and the other is left hand threads, this allows adjustment once the entire
linkage is setup. We found that the ball link must be threaded nearly all the way down the
threads.