Extreme Flight 104 Laser EXP ARF, Инструкция по сборке

Страница: 5 / 30

Items needed to complete this model:
1. Gas motor, 85-120cc
2. Engine standoffs
3. Fuel tank, 34 ounce
4. Fuel line, approximately 6 feet
5. Fuel Dot
6. 5” EF carbon spinner with aluminum backplate
7. Propeller
8. Receiver, 8CH minimum
9. Servos, 7 metal gear of at least 500oz, 1 high speed for throttle.
10. Servo extensions, (4) 6’ RX to aileron, (3) 24” 2 for aileron to RX extensions and 1
for throttle, (3) (2) 48” elevators and 1 48” for the rudder
11. Servo arms, (3) 2” half arms for elevators/rudder, (4) 1.5” half arms for ailerons, (1)
1’ half arm for throttle, (1) 4” full arm for rudder if using pull pull rudder setup.
In addition you will need a basic set of hobby tools, Xacto knife, 30 minute epoxy or
equivalent, thin CA, drill and bits, socket head ball drivers, and other miscellaneous
hand tools.
Suggested items to complete this model:
1. Desert Aircraft 120cc gas motor
2. Blazing star DA-120 standoff
3. Flowmaster 34oz gas tank
4. Flowmaster Fuel line
5. Xessories anodized fuel dot (color match)
6. EF 5” color match spinner
7. Falcon propeller
8. Receiver
9. MKS servos, options are 777A+/599/380 or equivalent 500oz torque metal gear
servo
10. EF 20AWG extensions
11. EF anodized servo arms
12. EF black socket head servo screws 30 or 100pk
13. EF anodized washer set, color match
14. EF color match velcro, 2m X 20mm
15. EF servo safety clips
All items above are available from Extreme Flight RC.