background image

20

ENGLISH

fIrst IGnItIon settInGs

once the power cord at the back of the stove has been connected, move the switch, also located on the back, to (i).

The switch at the back of the stove powers the stove board.

The stove remains off and a first screen appears on the panel reading oFF .

date-tIme

This menu allows the date and time to be set.

CONTrOLs PrOCeDUre

 

Š

Press key 6.

 

Š

Press key 3 until 

SeTTiNgS

 appears and confirm by pressing key 6.

 

Š

Confirm 

DATe-TiMe

 by pressing key 6 and using keys 4 and 5 to set the day. 

 

Š

Continue by pressing key 6.

 

Š

Use keys 4 or 5 to set and key 6 to advance, to regulate the day, hour, minutes, date, month, year.

 

Š

Press key 6 to confirm and key 1 to scroll back through the menus until the initial page.

lANgUAge

This menu allows the preferred language to be selected.

The available languages are: 

italian - english - german - French - spanish - Portuguese - Danish - estonian - Croatian - slovenian - Dutch - Polish.

CONTrOLs PrOCeDUre

 

Š

Press key 6.

 

Š

Press key 3 until 

SeTTiNgS

 appears and confirm by pressing key 6.

 

Š

Press key 3 until 

lANgUAge

 appears and confirm by pressing key 6.

 

Š

select the language using keys 4 or 5.

 

Š

Press key 6 to confirm and key 1 to scroll back through the menus until the initial page.

DegReeS

This menu allows you to set the unit of measure for the temperature. The predefined value is °C.

CONTrOLs PrOCeDUre

 

Š

Press key 6.

 

Š

Press key 3 until 

SeTTiNgS

 appears and confirm by pressing key 6.

 

Š

Press key 3 until 

DegReeS

 appears and confirm by pressing key 6.

 

Š

Use keys 4 -5 to select Celsius or Fahrenheit.

 

Š

Press key 6 to confirm and key 1 to scroll back through the menus until the initial page.

J

no IGnItIon

the applIanCe may faIl to lIGht BeCause the auGer Is empty and not always aBle to load the Burn 

pot fast enouGh wIth the pellets needed for normal IGnItIon. If the proBlem oCCurs after only a 

few months of operatIon, CheCk that the routIne CleanInG desCrIBed In the stove handBook has 

Been CarrIed out CorreCtly

Содержание RAFFAELLA IDRO H15





































Отзывы: