26
ENGLISH
settInGs
•
date-tIme
•
lanGuaGe
•
set deGrees
See chapter: commiSSioning SettingS.
DiSplAY
This menu allows you to adjust the brightness of the display. The values range from OFF, 1 to 20. if set to OFF, the display backlighting is set
to maximum brightness and then, turns off after a 60 second delay.
The backlighting can be turned on again by pressing any key or if the stove is in alarm status.
CONTrOLs PrOCeDUre
Press key 6.
Press 3 until
SeTTiNgS
appears and confirm by pressing 6.
Keep pressing 3 until
DiSplAY
appears and confirm by pressing 6.
Use keys 4 -5 to set the desired intensity (
SeT
)
Press key 6 to confirm and key 1 to return to the previous menus to the initial state.
STAND - BY
The
STAND-BY
function, if enabled, is used to turn the stove via an additional thermostat.
CONTrOLs PrOCeDUre
Press key 6.
Press 3 until
SeTTiNgS
appears and confirm by pressing 6.
Keep pressing 3 until
STAND-BY
appears and confirm by pressing 6.
Use keys 4-5 to enable (
oN
) / disable (
oFF
).
Press 1 several times to confirm and exit the menu
FiRST loAD
This function allows to fill the auger, facilitating the first start-up phases of the stove, or in the event that the pellet hopper is empty.
with the stove cold and "OFF", make sure the pellet has been introduced inside the tank and activate the
FiRST loAD
function, confirming
with OK.
To interrupt continuous loading, simply press key 1 for 3 seconds.
CONTrOLs PrOCeDUre
Press key 6.
press 3 until
SeTTiNgS
appears and confirm by pressing 6.
Keep pressing 3 until
FiRST loAD
appears and confirm by pressing 6.
Use keys 4 and 5 for enabling “ON” or disabling “OFF”
Press key one several times to confirm and exit the menu.
oUTleT AiR
This function allows any air in the stove to be discharged. By activating the pump function, it will be powered alternatively with 30 second
work phases and 30" stop for 15 minutes. with the stove cold and in "OFF", activate the
oUTleT AiR
function, pressing key 6 to confirm. To
interrupt, press and hold key 1 for 3 seconds.
CONTrOLs PrOCeDUre
Press key 6.
Press 3 until
SeTTiNgS
appears and confirm by pressing 6.
Keep pressing 3 until
oUTleT AiR
appears and confirm by pressing 6.
Use keys 4 and 5 for enabling “ON” or disabling “OFF”
Press key one several times to confirm and exit the menu.
Содержание RAFFAELLA IDRO H15
Страница 1: ...MADE IN ITALY design production RAFFAELLA IDRO H15 18 004280754 rev 000 UK THERMO PRODUCTS USER MANUAL...
Страница 2: ...APPLY TECHNICAL DATA LABEL...
Страница 35: ...35...
