Extraflame INSERTO COMFORT MINI, Инструкция по эксплуатации

Страница: 36 / 44

Page 36
14. CLEANING
1. CLEANING THE BURN POT
The burn pot must be cleaned ever y day. To do so:
•
Remove the burn pot form its compartment and
clean the holes using the poker provided (see
Fig.1).
•
Remove the ash from the burn pot using a vacuum
cleaner.
•
Vacuum the ash deposited in the burn pot
compartment.
Figure 1
2. USING THE SCRAPERS
Cleaning the heat exchangers allows you to maintain a
constant heat yield over time. This type of maintenance
must be carried out at least once a day. For this purpose,
use the special scrapers located in the upper part of the
stove, moving them up and down several times (see Fig.2).
Figure 2
3. CLEANING THE ASH PANS
The ash pans (indicated by the arrows in Fig. 3) should be
emptied as needed using a vacuum cleaner.
Figure 3
4. CLEANING THE HEAT EXCHANGER (monthly)
The heat exchanger chamber should be cleaned once a
month, as the soot deposited on the back of the cast iron
firewall obstructs the normal flow of the fumes.
To access the heat exchangers, you have to remove the
central piece of the firewall as follows:
•
Remove the burn pot from its seat.
•
Manually turn the screw-bolt shown in Figure 7 by
180°.
•
Grasp the removable cast iron piece with your
hands and turn it downward.
•
Slide it out of the combustion chamber, pulling it
towards you, watching out for the two side hooks in
cast iron situated at the bottom.
When the exchanger compartment is accessible, use the
scraper provided to remove the deposited residues and
scrape off any incrustation. Use the vacuum cleaner only in
Figure 6