Extraflame EcoLogica Idro, Инструкция по эксплуатации

Страница: 23 / 40

Page 23
12. USER PARAMETERS
USER PARAMETERS
WATER TEMPERATURE ADJUSTMENT
Display D1 Display D2 Function
70°C Water temperature adjustment
WEEKLY PROGRAMMER
Display D1 Display D2 Function
off 0 Act./ Deact. Weekly programmer
00:00 1 1st ignition time
00:00 2 1st switch-off time
off 1 3 Consents for 1
st
ignition /switch-off for the various days
00 4 Installer parameter
00:00 5 2nd ignition time
00:00 6 2nd switch-off time
off 1 7 Consents for 2
nd
ignition/switch off for various days
00:00 8 3
rd
ignition time
00:00 9 3
rd
switch-off time
off 1 A Consents for 3
rd
ignition /switch-off for the various days
DAY-NIGHT TEMPERATURE FUNCTION
Display D1 Display D2 Function
06:00 B Start day period/ end night period
22:00 C Start night period/ end day period
25 D Day period max. temperature
20 E Night period max. temperature
PELLET LOAD ADJUSTMENT
Display D1 Display D2 Function
00 F % pellet load adjustment
12.1 Water temperature adjustment
This function allows the user to set the desired water temperature. Press and hold button 3 to
access this parameter , press button 5 and release the 2 keys at the same time.
In display D1 flashing “H2O” (water) and “70°C” will appear. This corresponds to the value that
can be modified while nothing appears on display D2.
Use keys
2 and 3 to adjust the desired temperature with a maximum range from 40 to 90°C. To
confirm use key 1 .
12.2 Weekly programmer
The weekly programmer functions allow the user to programme 3 phases within a day to use on
all days of the week. The ignition and switch off times must be included within the span of one
day, from 0 to 24, and not overlapping several days:
E.g.
ignition at 07:00 / switch-off at 18:00 OK
ignition at 22:00 / switch-off at 05:00 ERROR