background image

32

ENGLISH

AddITIONAL wARNINGs

 

Š

Only use the fuel recommended by the manufacturer. The product must not be used as an incinerator.

 

Š

Do not use the product as a ladder or supporting structure.

 

Š

Do not place laundry on the product to dry it. Any clothes-horse or similar objects must be kept at due distance from the product. 

Danger of fire or damage to the coating.

 

Š

The user is fully liable for any incorrect use of the product. The manufacturer bears no civil or criminal liability for incorrect use.

 

Š

Unauthorised tampering of any nature or replacement of spare parts of the product with non-original parts may endanger the operator 

and the manufacturer bears no civil or criminal liability for this.

 

Š

Large parts of the surface of the product can get very hot (door, handle, glass, smoke outlet pipes, etc.). Please therefore avoid coming 

into contact with these parts without wearing suitable protective clothing or using appropriate measures, such as heat protective gloves. 

 

Š

DO NOT use the product with the door open or if the glass is broken.

 

Š

The product must be electrically connected to a system equipped with an operational earthing system.

 

Š

Turn off the product in the event of a failure or malfunctioning.

 

Š

Unburned pellets that build up in the burner following each failed start-up must be removed before attempting to start up the product 

again. Make sure that the burner is clean and correctly positioned before starting it up again.

 

Š

Do not wash the product with water. Water may penetrate into the unit and cause faults in the electrical insulation. This can cause 

electric shocks.

 

Š

Installations not complying with the regulations in force, as well as incorrect use and failure to comply with the maintenance scheduled 

by the manufacturer, will invalidate the guarantee.

DiSpoSAl

INfORmATION fOR mANAGEmENT Of ELEcTRIc ANd ELEcTRONIc APPLIANcE wAsTE cONTAINING bATTERIEs OR 

AccUmULATORs

This symbol, which is used on the product, batteries, accumulators or on the packaging or documents, means that at the end of its useful 

life, this product, the batteries and the accumulators included must not be collected, recycled or disposed of together with domestic waste.

Improper management of electric or electronic waste or batteries or accumulators can lead to the leakage of hazardous substances contained 

in the product. For the purpose of preventing damage to health or the environment, users are kindly asked to separate this equipment and/

or batteries or accumulators included from other types of waste and to arrange for disposal by the municipal waste service It is possible to ask 

your local dealer to collect the waste electric or electronic appliance under the conditions and following the methods provided by national 

laws transposing the Directive 2012/19/EU.

Separate waste collection and recycling of unused electric and electronic equipment, batteries and accumulators helps to save natural 

resources and to guarantee that this waste is processed in a manner that is safe for health and the environment.

For more information about how to collect electric and electronic equipment and appliances, batteries and accumulators, please contact your 

local Council or Public Authority competent to issue the relevant permits.

Содержание DIADEMA ACS IDRO





































Отзывы: