manualshive.com logo in svg

Extraflame DIADEMA ACS IDRO, Руководство пользователя

Поделиться
Скачать
Extraflame DIADEMA ACS IDRO Скачать руководство пользователя страница 13

OFF

13

ENGLISH

Control panel

BUTTON 

ON/OFF

Display OF variOUs 

TexT messages

TO aCCess

 THe meNU

seTTiNg 

TemperaTUre 

OperaTiON pOWer 

aDJUsTmeNT

Display iCons key

indicates the receipt of the radio signal 

On = during radio communication

Off = no radio communication

Flashing = serial port excluded

indicates the stove modulation

On = the stove is working at the set power

Flashing = the power at which the stove is working is different to 

the power set, the stove is modulating (for various reasons)

indicates the presence of an alarm.

On: indicates the presence of an alarm

Off: indicates the absence of alarms

Flashing: indicates the deactivation of the depression sensor.

it indicates weekly programming functioning

indicator on = weekly programming active

indicator off = weekly programming disabled

indicates the water temperature status

Off = the T° read by the probe is above the set temperature

On = the T° read by the probe is below the set temperature

indicates the contact of the external additional thermostat
Contact closed: the contact of the external additional thermostat is 
closed and the sTBy function is disabled.
Contact open: the contact of the external additional thermostat is 
open and the sTBy function is disabled.

Flashing with contact closed: the contact of the external additional 

thermostat is closed and the sTBy function is activated

Flashing with contact open: the contact of the external additional 

thermostat is open and the sTBy function is activated

it indicates fumes motor operation.

Off = fumes motor disabled

On = fumes motor active

Flashing = breakdown (contact technical after-sales service)

it indicates the summer / winter function

Off: activates the winter function 

On: activates the summer function

Not used

indicates the DHW request

Off: DHW satisfied, pump off

Flashing : the DHW request exists but the work conditions are not 

satisfied, pump off

On : the DHW is in request mode and the work conditions are 

satisfied, pump on 

it indicates pellet feed motor operation

Off = pellet feed motor disabled

On = pellet feed motor active

indicates the heating request

Off : heating satisfied, pump off

Flashing : the heating request exists but the work conditions are 

not satisfied, pump off

On : the heating is in request mode and the work conditions are 

satisfied, pump on 

it indicates pump operation

Off = pump deactivated

On = pump active

Flashing = the safety device is active (H2O temperature > 85°C)

indicates the puffer request, if active.

Off : puffer satisfied, pump off

Flashing : the puffer request exists but the work conditions are not 

satisfied, pump off

On : the puffer is in request mode and the work conditions are 

satisfied, pump on 

Содержание DIADEMA ACS IDRO





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды